RT^™ 

Hendrickson approves the use of RT in the following vocational truck applications: dump, municipal, oil field, and utility. All such applications must comply with applicable Hendrickson specifications and must also be approved by the respective vehicle manufacturer with the vehicle in its original, as-built configuration. Contact Hendrickson and the respective vehicle manufacturer for approval of additional applications.

1. Contact Hendrickson for availability of additional capacities
2. Installed weight includes complete suspension, torque rods, axle brackets and frame brackets at 54 inch axle spacing
3. Suspension must be paired with axle of appropriate rating
4. Site travel rating – operators using vehicles equipped with liftable pusher or tag axles must not exceed published ratings. Site ratings are limited to no more than five percent of vehicle operation at speed not to exceed five mph. Liftable pusher or tag axles should only be raised (or unloaded) to improve vehicle maneuverability in job site applications or when vehicle is empty. Site travel ratings are consistent with published axle manufacturer’s limitations. Axle and suspension site travel ratings must not be exceeded.
5. Transverse torque rods are standard on 46,000 pound capacity suspensions with rubber center bushings, refer to Hendrickson publications 59310-004 and 59310-058 for more information.
6. Heavy-duty equalizing beam option available at 46,000 pound capacity
7. Aftermarket shock absorbers available, refer to 59310-003 for more information