Conventional Ride Heights

• Single-axle capacities from 20,000 pounds to 30,000 pounds
• Ride heights from 12 to 23 inches
• Spacing from 49 to 122 inches, tri- or quad-axle up to 144 inches

Low Ride Heights

• Single-axle capacities from 20,000 pounds to 30,000 pounds
• Ride heights from 4 to 17 inches
• Excellent ground clearance on liftable models
• Axle spacing from 49 to 122 inches

Single-Axle Applications

• The HT SERIES is available in a HIGH CONTROL version for use on trailers with multi-articulation points like doubles, triples, B-trains, dollies and full trailers
• Single-axle capacities from 20,000 pounds to 30,000 pounds
• Ride heights from 4 to 23 inches

Unparalleled Support

• 5-year/500,000-mile structural warranty
• Backed by thousands of dealers
• Off-the-shelf replacement parts

TRI-FUNCTIONAL® Bushing

• Proven technology provides mile after mile of worry-free service
• Voids positioned to optimally absorb all road forces
• The ideal combination of ride softness and roll stability
• Specially formulated rubber compound stands up to the toughest operating conditions
• Only two long-life bushings in each suspension — fewer than any other design
• Five- or seven-year warranty depending on application

Rigid Trailing Arm/Solid Axle Connection

• Simplicity of design reduces the number of moving parts, bushings and fasteners for minimal maintenance
• Provides superior stability while eliminating torque rods and stabilizer bars
• Eliminates retorquing requirements
• Low spring rate for exceptional ride quality
• Compatible with industry standard axles
• Large bore shocks for longer life

QUIK-ALIGN® Pivot Connection (Standard on Most Models)

• Provides quick, easy axle realignment
• Save time and money should axle realignment become necessary
• TORQ-RITE® shear bolt eliminates guesswork
• Realign using standard tools — no torque wrench or welding required
• Optimize tire life

1. Capacity of primary suspension only; axle not included.

2. Suspension ride heights must be set within Hendrickson specifications in order to provide load equalization among axles and to ensure proper suspension performance. Failure to maintain proper ride height settings can lead to suspension, axle or trailer damage.

3. The HT250T is intended for use as a liftable suspension, in combination with other HT primary models. It may also be used in place of an HT230 when the application calls for high travel or low ride height.