|
CANTON, OH. – Hendrickson unveils an automatic trailer Back-up Alarm
System for improved awareness of backward vehicle movement in areas of limited
maneuverability and visibility.
Trailer manufacturers can install the audible alarm system
on new vehicles, or it can be purchased through the Hendrickson aftermarket
network for retrofitting.
With rearward trailer movement, the system activates a very
loud warning sound to help alert bystanders and other drivers in areas such as
congested dock operations and near crosswalks and walkways that the vehicle is
moving in reverse.
A wheel-end direction sensor reads the ABS tone ring
activating the alarm, a 97-decibel repeating pound pulse, after one-half of a
reverse revolution of the tire. The alarm ceases two seconds after the trailer
stops or immediately upon any forward movement.
The system comes in a kit, which includes a direction
sensor, electronic control unit, wiring harness and alarm. The electronic module
features an additional output that may be wired for a warning or back-up light
(not included in the kit).
The easy-to-install, stand-alone, automatic system requires
no communication with the tractor and features reverse polarity protection and
reset fuses.
For
additional information about equipping your trailer with the Back-up Alarm
System, contact Hendrickson International, Trailer Suspension Systems, Canton,
Ohio, toll free at 866-RIDEAIR (743-3247).
Hendrickson International is one of the largest global
suppliers of truck and tractor suspensions; trailer suspensions; lift, trailer
and steer axles; springs; bumpers, and stamped components to the commercial
transportation industry. Headquartered in Woodridge, Ill., Hendrickson has been
meeting the needs of the transportation industry for 90 years. |
|
