 |
A value-added option for INTRAAX® and non-integrated trailer axles.
TIREMAAX® automatic tyre inflation systems provide a basic, responsive approach to help extend tyre life and increase fuel efficiency. These patented systems draw from the trailer air supply to keep your trailer tyres properly inflated and rolling smoothly.
TIREMAAX comes in two configurations: TIREMAAX EC (Electronic Control) and TIREMAAX CP (Constant Pressure), the difference is the control unit. TIREMAAX EC features an electronic control unit that provides full system programming and monitoring. TIREMAAX CP features a pneumatic pressure regulator and a straight forward mechanical design.
TIREMAAX delivers a reliable, durable approach for maintaining proper inflation levels. The system monitors pressure in all tyres and directs air to one or more tyres when they dip below the preset level.
The problem of improper tyre inflation remains one of the most significant maintenance issues facing the industry today. Studies show that improperly inflated tyres can greatly reduce fuel economy and decrease tyre life. Incorrect tyre inflation may also lead to compromised braking, poor handling and reduced stability.
|
|
 Increase tyre life, fuel mileage and productivity
|
Directs air to tyres that fall below a preset pressure level
Aids in reducing run-flat failures and improving casing life
Helps extend service intervals for tyres
Helps reduce costly roadside service due to tyre failures
Vents through the axle to help prevent wheel-end contamination
In-line check valves isolate each tyre
Manual pressure check and fill available at hose end
Does not pressurise the axle tube
Bolt-in, ball-bearing rotary union for reliability
Serviceable filter at supply port helps keep lines and seals clean
Independent trailer-based system — no tractor modifications required
|
|
TIREMAAX® EC
Smart system (ECU controlled)
Pre-programmed with pressure settings from 4.8 bar to 9 bar
Checks tyre pressure every 10 minutes
Non-pressurised seals and lines — when not inflating
LED power indicator on ECU
Blink codes on ECU for troubleshooting
Trailer-mounted indicator alerts operator to system status
Indicator comes on when tyre pressure is low by 1.3 bar or more
|
TIREMAAX® CP
Comes preprogrammed in pressure settings from 4.8 to 9 bar
An integrated pressure control unit allows target pressure to be reset
Checks tyre pressure continuously without pressurising the axle or wheel ends
Indicator comes on when system flow exceeds approximately 2 litres per minute
Trailer-mounted indicator illuminates only when maintenance is required
|
|
